Pultrusion Machinery-Product Information

Location：Home >NO: GTI-EP Information

Pultrusion Machinery

Model NO：	GTI-EP

Introduction：	Pultrusion Fibre bundles and slit fabrics are pulled through a wet bath of resin and formed into the rough part shape. Saturated material is extruded from a heated closed die curing while being continuously pulled through die. Some of the end products of the pultrusion process are structural shapes, i.e. I beam, angle, channel and flat sheet. These materials can be used to create all sorts of fibreglass structures such as ladders, platforms, handrail systems tank, pipe and pump supports.

Specification
Item	Description	GTI-EP05TON
1	Size, Meter	18Lx1.0Wx1.8H
2	Spool Frame	2.4x1.2x2.0 1 set 360 Spools
2	Spool Frame	Ceramic Guide Movable Creel
3	Carriage	Stainless Steel P.P Guided Plate
4	Resin tank	Stainless Steel 900Lx600Wx250 H
5	preforming	P.P Preforming Plate
		Adjustable
		Resin Recycling Device
6	Heated Die	S.C.R. Temperature Control
6	Heated Die	Three-Step Heater 8000w
7	Cooling	Natural
8-1	Traction(Hydraulic)	10HP Hydraulic System
		PU Plate 30mm Thick
		100Φx1000s Cylinder-pull
		65Φx100s Cylinder-Clamping
8-2	Traction(Ball Screw)	10HP AC Inverter
		SFDR 5010N-1100 L-2 sets
		Quick Return Device
9	Cutter	3HP Motor
		400Φmm Diamond Saw Cutter
		Anti-dust Sprayer

Pultrusion Products

Fibre bundles and slit fabrics are pulled through a wet bath of resin and formed into the rough part shape. Saturated material is extruded from a heated closed die curing while being continuously pulled through die. Some of the end products of the pultrusion process are structural shapes, i.e. I beam, angle, channel and flat sheet. These materials can be used to create all sorts of fibreglass structures such as ladders, platforms, handrail systems tank, pipe and pump supports.